Interface and transmission standard compliance
Strictly following the USB 2.0 specification (transmission rate of 480Mbps) released by USB-IF, certified through USB-IF compatibility testing, fully compatible with all TYPE C male heads that comply with USB 2.0/3.0 standards, ensuring stable and reliable data transmission and charging functions.
6PIN pin allocation: VCC (power)+GND (ground)+D+D+(positive data)+D - (negative data)+ID (identification)+NC (empty pin), meets basic charging and data transmission needs, suitable for various consumer electronics and industrial control equipment.
Environmental Compliance
Fully compliant with the EU RoHS 3.0 directive (2015/863/EU) and the Chinese GB/T 26572 standard, it does not contain 10 harmful substances such as lead, mercury, cadmium, hexavalent chromium, etc. All raw materials have passed SGS environmental certification and can provide complete environmental testing reports, meeting strict market entry requirements in Europe, America, Japan, and South Korea.
304 stainless steel, brass, and LCP materials are all recyclable materials that comply with the concepts of green manufacturing and sustainable development.
Electrical safety compliance
Insulation resistance ≥ 100M Ω (500V DC), withstand voltage ≥ 500V AC (no breakdown for 1 minute), ensuring safe use.
Compliant with the IEC 62368-1 safety standard, the electrical clearance and creepage distance meet the standard requirements, effectively preventing electrical faults and leakage risks.
FCC Part 15 Class B EMC certification, with electromagnetic radiation controlled at ≤ 54dB μ V/m (30MHz~1GHz) to avoid interference with surrounding wireless modules (such as WiFi and Bluetooth) and ensure overall device stability.
Production and Quality Compliance
ISO 9001:2015 quality management system certification, establishing full process quality control from raw materials to finished products.
Raw material batch control: Each batch of 304 stainless steel, brass, and LCP materials must provide material certification and performance test reports to ensure material quality.
100% electrical testing of finished products: full coverage of conductivity testing, insulation testing, and withstand voltage testing to ensure a 100% factory qualification rate.



For more information, please contact us:

- Hotline: +86 13310802726

- Email: mc13310802726@163.com

Storage and transportation precautions
Storage environment: Temperature -5 ℃~35 ℃, relative humidity 25%~55%, dry and ventilated, away from heat sources and corrosive gases.
Packaging requirements: anti-static shielding bag+moisture-proof agent+hard cardboard box, with "anti-static", "moisture-proof" and "handle with care" labels on the outer box.
After opening: Unused products must be resealed within 24 hours to prevent pin oxidation and dust contamination.
Precautions for installation operation
PCB design: The diameter of the socket is 0.8 ± 0.05mm, and the size of the solder pads meets the requirements of the specification book, ensuring smooth pin insertion and firm soldering.
Reflow soldering parameters: Preheat 90~120 ℃ (60~90 seconds) → Peak value 250~260 ℃ (≤ 8 seconds) → Cooling ≤ 50 ℃ to avoid LCP deformation caused by high temperature.
Insertion inspection: Use AOI or magnifying glass to check, ensuring that the mother seat is vertical (tilt ≤ 1 °), the pins are not bent, and the soldering is full without virtual soldering.
Precautions for use and maintenance
Rated parameters: maximum working current 3A, voltage 5V, strictly prohibited from overloading to prevent pin overheating and damage.
Insertion and extraction operation: Vertical and smooth insertion and extraction should be avoided, avoiding tilting or violent pulling. It is recommended to control the insertion and extraction life within 3000 times. The non strip design has weaker pull-out resistance than the strip design (about 80%).
Regular maintenance: Use a dry soft bristled brush to clean the dust inside the interface, and disable metal tools to prevent damage to the internal structure.




For more information, please contact us:

- Hotline: +86 13310802726

- Email: mc13310802726@163.com