1. Industry Certifications USB-IF Certification: Passed the TID certification (TID No. XXXX), complies with the USB Type-C specification R2.4 standard, and supports the USB PD 3.1 protocol. Environmental Protection Certification: Complies with EU environmental protection directives such as RoHS 2.0 and REACH SVHC, and adopts lead-free production. Safety Certification: Passed the UL 94V-0 flame retardant test, and the shell material meets the insulation requirements of IEC 60664-1. 2. Standard Compatibility Protocol Compatibility: Supports USB3.1 GEN1, USB2.0, and DisplayPort Alt Mode, and can achieve 4K video output through an adapter. Interface Compatibility: Compatible with mainstream Type-C male connector specifications (such as Huawei Mate 60 Pro and Apple MacBook Air), and the insertion and extraction force is controlled between 3-5N. 3. Testing and Verification Environmental Test: High and low temperature cycle test from -40℃ to 85℃, and the insulation resistance is ≥1000MΩ under a humidity of 95% RH. Reliability Test: After 10,000 times of plugging and unplugging tests, the contact resistance change rate is ≤10%, which complies with the GB/T 20234.1-2023 standard.

For more information, please contact us:

- Hotline: +86 13310802726

- Email: mc13310802726@163.com

1. Installation Specifications Welding Parameters: It is recommended that the peak temperature of reflow soldering is 235-245℃, and the heat preservation time is 40-60 seconds to avoid damaging the terminals due to high temperature. PCB Design: The tolerance of the pad spacing should be controlled within ±0.05mm. It is recommended to add an anti-solder bridge design to prevent short circuits. Electrostatic Protection: An anti-static wristband should be worn during operation, and the ESD level should be ≤2kV to avoid electrostatic breakdown of the internal circuit. 2. Usage Limitations Environmental Requirements: Avoid using it in an environment with a strong magnetic field (>50mT) and high dust (>100mg/m³), which may affect the signal stability. Current Overload: It is recommended that the long-term working current is ≤4.5A, and the instantaneous peak current should not exceed 6A to prevent the terminals from overheating. Plugging and Unplugging Operations: The insertion angle deviation should be ≤5°, and violent plugging and unplugging should be avoided to prevent the terminals from deforming. 3. Maintenance Suggestions Regular Inspection: Use a microscope (≥20 times) to check whether the solder joints are cracked and whether the terminals are oxidized every quarter. Cleaning Method: Wipe the interface with anhydrous alcohol (purity ≥99%), and avoid using sharp tools to damage the surface coating of the terminals. Inventory Management: The storage environment should be dry (humidity ≤60% RH) and away from light. Vacuum packaging is recommended, and the shelf life is 2 years.

For more information, please contact us:

- Hotline: +86 13310802726

- Email: mc13310802726@163.com