Industry certification

USB-IF certification: Compliant with USB Type-C specification R2.1 and USB PD 3.0 standards, passed TID certification (TID No.XXXX), ensuring protocol compatibility and electrical performance compliance.

Safety certification: UL 498 certified, with insulation withstand voltage testing up to 1500V AC, meeting international electrical safety standards; Compliant with GB/T 20234.1-2023 domestic interface specifications.

Environmental certification: Fully compliant with RoHS 2.0 and REACH SVHC environmental directives, free from harmful substances such as lead and mercury, and the production process has passed ISO 14001 environmental management system certification.

Reliability testing

Environmental testing: After 500 cycles of high and low temperature testing (-40 ℃ to 85 ℃) and 95% RH humidity testing (48 hours), there is no performance degradation.

Mechanical testing: Contact resistance change rate ≤ 10% after 10000 insertion and extraction tests; Under the continuous tensile test of 5N, there is no deformation of the structure and no cracking of the solder joints.

Electromagnetic compatibility: Through EN 55032 Class B electromagnetic radiation testing, the grounding design effectively suppresses high-frequency interference and meets the requirements for medical and communication equipment use.

For more information, please contact us:

- Hotline: +86 13310802726

- Email: mc13310802726@163.com

INSTALLATION REQUIREMENTS

Welding parameters: The recommended temperature for peak welding is 255-265 ℃, and the welding time is 3-5 seconds; The manual welding temperature should be controlled at 320 ± 10 ℃ to avoid high temperature damage to the LCP insulation material.

PCB design: The solder pad aperture needs to match the pin (tolerance ± 0.05mm), and it is recommended to add a soldering layer to improve soldering reliability; The grounding pin needs to be separately designed with a large copper covered area.

Limitations

Environmental conditions: Avoid long-term use in environments with high temperatures exceeding 85 ℃, 95% RH, high humidity, or strong acidity or alkalinity; Stay away from areas with strong magnetic fields (>50mT) to prevent signal interference.

Current load: It is recommended that the continuous operating current should not exceed 4.5A, and the instantaneous peak current should not exceed 6A to prevent terminal overheating; Equipped with E-Marker chip cable to achieve 100W charging.

maintenance

Regular inspection: Use a magnifying glass (10x or more) every quarter to check whether the solder joints are cracked and whether the terminals are oxidized; Wipe with anhydrous alcohol during cleaning to avoid corrosive solvents.

Long term storage: When not in use, it should be sealed and stored to avoid terminal oxidation caused by humid environments; Suggest pairing with a dust cap to protect the interface and prevent foreign objects from entering.

Compatibility Description

Equipment matching: It needs to be used in conjunction with a TYPE C female socket that complies with the USB-IF standard to avoid poor contact or protocol incompatibility caused by non-standard interfaces.

Cable selection: When transmitting 10Gbps data or 100W power, it is necessary to use certified cables that support the corresponding specifications, otherwise performance degradation may occur.

For more information, please contact us:

- Hotline: +86 13310802726

- Email: mc13310802726@163.com